Sherwood 20in Wide Drum Sander – Cabinet Stand

The Sherwood 20in Wide Drum Sander is a newly redesigned drum sander that not only looks the part, but also performs on a whole new level. 

Please Note: The black extension wings are an optional add-on found in the drop down menu.

With a beastly 2HP motor this unit will not get bogged down on larger jobs. And a drum speed of 1400 RPM allows for rapid removal of material.

Mounted to a cabinet stand this sander is ready for any workshop. We have had it fitted with a digital depth guide to compliment the traditional needle guide.

The open design of the sander allows for a 500mm wide sanding capacity in a single pass and allows for 1000mm of capacity when you rotate your workpiece and feed it through the open side. 

Featuring a 130mm drum, this sander will last longer between paper changes as its area coverage is much larger than similar units.

Variable feed controls allow you to slow down or speed up the feed rate as necessary allowing you the user to dial in exactly what speed you want for the ultimate finish.

This unit can also be fitted with extended in-feed and out-feed tables giving you much more working space and assistance when feeding large pieces into it. These are sold separately. Please select these from the drop-down menu if you wish to add them to your purchase.

The unit is also fitted with dual 100mm (4in) dust ports to allow for great dust extraction.

Please note this machine runs on a 15amp AU plug.

Power	2HP
RPM	1400
Plug	15A AU
Dust Ports	2 x 100mm (4in)
Bed Size (Without Optional Extension Tables)	600mm x 600mm
Bed Size (With Optional Extension Tables)	1150mm x 600mm
Bed Height	840mm
Workshop Footprint (With Optional Extension Tables)	700mm x 1100mm x 1420mm
Base Footprint	900mm x 420mm
Max Sanding Depth Per Pass	100mm
Max Sanding Width Per Pass	500mm